Nova Repeater has three delay time ranges labelled for both min, mid and max positions. These delay times have been carefully chosen to match the sweet-spot times used by most guitar players, making it much easier for you to dial in the perfect delay time – even without a display.

The pedal features two inputs dedicated to instrument or line level signals which means you can use it equally well in front of your amp or in an effects loop. It also has a ‘KillDry’ switch that makes it possible to use the pedal in a parallel effect loop and is also great for guitar players who use a mixer to prevent their dry sound from being processed. An FX.Level pot lets you adjust the wet level of your signal which means that you won’t get annoying level drops on your dry sound – a common problem with other pedals.

Nova Repeater has a new multi-function knob that lets you control the amount of modulation as well as turn the effect on/off. The chorus has been re-tuned making more dramatic modulation effects possible and, on top of that, a brand new vibrato mode has been added. This was a major request among Nova Delay users and makes it possible to emulate classic tape delay wow-and-flutter or create lush modulated pads with a volume pedal.

Again, taking on numerous user requests, we added a new dual delay – ¼ and 1/8 notes. This stereo delay is the secret behind Steve Lukather 80’s sound – just make sure you set the delay time at exactly 400ms.

Nova Repeater also features a brand new adaptive dynamic delay that automatically sets the perfect threshold for the ducking. No calibration is needed – even if you decide to turn up the volume during a solo, Nova Repeater will automatically adjust the threshold on-the-fly.

The bottom line
Nova Repeater lets you focus on playing and always delivers exactly what you are looking for. Great sound, simple to use and more features than any other pedal at this price. What more could you ask for?

Connectors:		¼" phone jacks w. mono-sense

Input Type		Single ended

Impedance:		1 MOhm

Max. Input Level:		10 dBu @ 12V supply

Connectors:		¼" phone jacks w. mono-sense

Max. Output Level:		10 dBu @ 12V supply

Output Type		Balanced/Single ended w. ground sense

Impedance		0 Ohm

Sense Input Impedance		225 Ohm

D to A Conversion		24 bit, 128 x oversampling bitstream

A to A Delay		1.65 ms

Dynamic Range		106/98 dB, 20 Hz to 20 KHz @ Input level 16/-2 dBu, not A-weighted

THD		< -90 dB (0.0032 %) @ 1 kHz, I/O Level 16 dBu, Load > 2400 Ohm

Frequency Response		+0.1/-0.2 dB, 20 Hz to 20 KHz

Crosstalk		< -100 dB, 20 Hz to 7 KHz, < -94 dB, 7 kHz to 20 kHz

Complies with:

EN 55103-1 and EN 55103-2 FCC Part 15, Class B, CISPR 22, Class B